MATLAB XPC TARGET 4 - DEVICE DRIVERS Spezifikationen PDF herunterladen (Seite 228)

100

101

7 Advantech

7-28

enter numbers between 1 and 8. For example, to use the first and second analog

output (A/D) channels, enter

[1,2]

Number the channels beginning with 1 even if the board manufacture starts

numbering the channels with 0.

Range Vector - Enter a range code for each of the channels in the channel

vector. The range vector must be the same length as the channel vector. This

board allows the range of each channel to be different.

The following table is a list of the ranges for this driver and the corresponding

range codes.

For example, if the first channel is -10 to +10 volts, and the second channel is

0 to 5 volts, enter

[-10,5]

The range settings have to correspond to the DIP-switch settings on the board.

MUX - From the list, choose either single-ended(16 channels) or

differential (8 channels). Your choice must correspond to the MUX-switch

setting on the board.

Sampletime - Base sample time or a multiple of the base sample time.

BaseAddress - Enter the base address of the board. It is important that this

entry corresponds to the DIP-switch settings on the board. For example, if the

base address is 300 (hexadecimal), enter

0x300

Input range (V) Range code Input range (V) Range code

-10 to +10 -10 0 to 10 10

-5 to +5 -5 0 to +5 5

-2.5 to +2.5 -2.5 0 to +2.5 2.5

-1.25 to +1.25 -1.25 0 to +1.25 1.25

-.625 to +.625 -0.625

1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 652 653

Kommentare zu diesen Handbüchern

Keine Kommentare

MATLAB XPC TARGET 4 - DEVICE DRIVERS Spezifikationen Seite 228

Kommentare zu diesen Handbüchern