MATLAB XPC TARGET 4 - DEVICE DRIVERS Spezifikationen PDF herunterladen (Seite 252)

100

101

8 Burr-Brown

8-12

Port Number (0-3) - Enter a number from 1 to 3 to identify the port used with

this block of digital input lines.

Sample Time - Enter a base sample time or a multiple of the base sample

time.

Module Number (1-3) - Enter a number from 1 to 3 to identify the connector

on the carrier board where the I/O module is inserted. This driver verifies if the

module is placed on the specified module connector.

BaseAddress or Carrier Board (ie: 0xd000) - Enter the base address of the

board. This entry must correspond to the DIP-switch settings on the board. For

example, if the base address is 300 (hexadecimal), enter

0x300

PCI-20041C Digital Output

Use a separate diver block for each port. By selecting the digital output driver

block, the port is configured as output.

Scaling Input to Output

Driver Block Parameters

Number of Channels - Enter a number between 1 and 8 to select the number

of digital output lines used with this port.

Port Number (0-3) - Enter a number from 1 to 3 to identify the port used with

this block of digital output lines.

Sample Time. Enter a base sample time or a multiple of the base sample time.

Module Number (1-3) - Enter a number from 1 to 3 to identify the connector

on the carrier board where the I/O module is inserted. This driver verifies if the

module is placed on the specified module connector.

Hardware Output Block Input Data Type Scaling

TTL double < 0.5 = TTL low

0.5 = TTL high

1 2 ... 247 248 249 250 251 252 253 254 255 256 257 ... 652 653

Kommentare zu diesen Handbüchern

Keine Kommentare

MATLAB XPC TARGET 4 - DEVICE DRIVERS Spezifikationen Seite 252

Kommentare zu diesen Handbüchern